FCP22A Singleturn Drehgeber

Servomontage-Potentiometer mit Kugellagern, 22 mm Außendurchmesser und seitlichen Revolver-Steckverbindern

About the FCP22A Single-turn Potentiometer

The FCP22A is a servomount type potentiometer with ball bearings, a 22mm outer diameter and turret side terminals.

Features FCP22A - Conductive plastic (Servomount)

  • Conductive plastic
  • Dimensions D x L (mm): 22.23x15
  • Standard Resistance Range 1 to 10 kilo ohm
  • Independent Linearity (± %): 1.0 to 0.25
  • Mechanical travel (+10° 0°): 360°
  • Electrical travel (±5°): 320° ±5°

Special Specifications

Extra taps (available up to 1 tap), multi-ganged (available up to 5 gangs, housing length is extended by 8.5mm per 1 gang), shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) with inch dimensions, special machining on the shaft.

Produktspezifikationen

Shaft diameter (mm)
3
Standard Resistance Values
1k, 2k, 5k, 10 k (O)
Special Practical resistance Values
200, 500, 20k, 50k, 100k (O)
Total resistance tolerance
Standard Class ±10% (K)
Independent linearity tolerance
Standard Class ±1.0%, Precision Class ±0.5%, Super precision Class ±0.25%
Resolution
Essentially infinite
Output Smoothness
Within 0.1% against input voltage
Contact Resistance Variation
Within 2% C.R.V.
Power Rating
1.0W
Electrical Travel
320º ±5º
Mechanical Travel
360º (Endless)
Insulation Resistance
Over 1,000MO at 1,000 V.D.C
Dielectric Strength
1 minute at 1,000 V.A.C.
Starting Torque
Within 1.5mN·m (15gf·cm)
Resistance temp. coefficient
±400p.p.m./ºC
Mass
Approx. 20g