CP22C Singleturn Drehgeber

1-Turn Potentiometer Metal Housing, Wirewound (Bushingmount)

About the CP22C Single-turn Potentiometer

The CP22C is a low-cost potentiometer with metal housing and rear extended lug terminals.

Features CP22C - Wirewound (Bushingmount)

  • Wirewound
  • Dimensions D x L (mm): 22x12
  • Standard Resistance Range 50 to 10 kilo ohm
  • Independent Linearity (± %): 0.5 to 0.25
  • Mechanical travel: 360°
  • Electrical travel: 355° ±5°

Special Specifications Available

Lower resistance values (10O, 20O), extra taps (available up to 1 taps), shaft with front and rear extension (rear shaft with 3mm dia. and 20mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.

Produktspezifikationen

Shaft diameter (mm)
6
Standard resistance range
50O to 10kO
Max. Practical resistance value
20kO
Total resistance tolerance
Standard Class ±3%(H) Precision Class ±1%(F)
Independent linearity tolerance
Standard Class ±0.5% Precision Class ±0.25% (±0.35% in case of within 1kO)
Power Rating
0.5W
Noise
Within 100O E.N.R.
Electrical Travel
355º ±5º
Mechanical Travel
360º (Endless)
Insulation Resistance
Over 1,000MO at 1,000 V.D.C
Dielectric Strength
1 minute at 1,000 V.A.C.
Starting Torque
Within 5mN·m (50gf·cm)
Resist. temp. coefficient of wire
±20p.p.m./ºC
Mass
Approx. 30g