E400 Inkrementaldrehgeber
With flange diameter 53.5 mm
E400 - Hollow Shaft Encoders
Incremental rotary encoders E400/E401 (flange diameter 58 mm) and E470/E471 (flange diameter 72 mm) can be coupled directly to any motorshaft by means of a joint. Available with or without zero pulse. Their construction technology employs a compact and innovating electronic circuitry granting the best performance at a contained price level
Features E400
- Pulses per revolution: 2 -36000
- Pulse code Incremental
- Joint hole diameter: 6 or 8 or 10 mm
- Protection degree: IP64
- Operating temp.: -10 ÷ +70ºC
Benötigen Sie dieses Produkt für Ihr Projekt?
Fordern Sie jetzt ein unverbindliches Angebot an oder senden Sie uns Ihre Kontaktdaten für eine unverbindliche und kostenfreie Beratung. Unsere Vertriebsingenieure setzen sich so schnell wie möglich mit Ihnen in Verbindung.
Produkt Downloads
Sprechen Sie mit unseren Experten
Nicht das richtige Produkt? Wir bieten Standard-Sensoren, helfen Ihnen aber auch gerne mit einem maßgeschneiderten Aufnehmer oder einer kompletten Messlösung weiter. Kontaktieren Sie uns einfach für eine kostenlose Beratung oder einen Kostenvoranschlag.
KontaktTechnische Spezifikationen
Spezifikationen | Wert |
---|---|
Absorption | 30÷80 mA max |
Case material | RE aluminium / E ABS |
Connections | Axial or radial cable 3 m long /1 m for line driver output Axial or radial MS connector, 7-pin/10- pin for line driver output* |
Electronic outputs | Push-pull, NPN open collector, 5Vdc or 8/24Vdc line driver signals protected against short circuits |
Inertia | ≤25g cm2 |
Max frequency | 100/200 KHz |
Max load | 80N axial / 100N radial |
Operating temperature | -10 ÷ 70°C |
Output signals | Two square waves 90° ±15° out of phase – Zero pulse width: 90°±15° |
Protection degree | IP64 |
Pulse code | Incremental |
Pulses per revolution | 2 ÷ 12500 |
Revolutions/minute | 6000 continuos/10000 temporary |
Shaft material | AISI 303 steel |
Shaft/joint hole | 6, 8, 10mm |
Shock resistace (11 ms) | 50 G |
Starting torque | ≤0,8 Ncm |
Stocking temperature | -20 ÷ 80°C |
Supply voltage | 5Vdc or 8/24Vdc - protection against polarity reversal |
Vibration resistance (10÷2000 hz) | 100 m/sec2 |
Zero reference pulse | one pulse/revolution |
Ähnliche Produkte
Benötigen Sie weitere Informationen?

REV Inkrementaldrehgeber
- Pulses per revolution: 1000 - 36000
- Pulse code: Incremental
- Shaft diameter: 6, 8, 9.52 or 10 mm 11 mm

EM turn Absolutdrehgeber
- Pulses per revolution: 8 - 2048
- Several mechanical versions available
- Supply voltage: 5Vdc or 8/24Vdc or 5/24Vdc

EP turn Absolutdrehgeber
- Shaft Ø: 6, 8, 9.52 or 10 mm
- Protection degree: IP64 (optional IP65)
- Operating temp.: 0 ÷ 70°C