18FLPA Linearpotentiometer-Serie

Leitfähiges Kunststoffmodell mit glattem Schaft und Schraubbefestigung am Gehäuse

About the 18FLPA Series Linear Potentiometer

The 18FLPA has a robust housing case and is with faston-terminals.

Features 18FLPA

  • Industrial conductive plastic model
  • Measurement range: between 15mm and 100mm
  • Resistance value: 500 to 20kO
  • Linearity tolerance: ±0.7% or ±0.5%, ±0.4%, ±0.3%, ±0.25% and ±0.2%
  • Body dimensions (mm): 20.5x18x (depends on the type of sensor)

The 18FLPA15, 18FLPA30, 18FLPA50 and 18FLPA100 are our available types within the 18FLPA Series.
For specfied information about a certain type, please contact us.

Special Specifications available

Stroke 150mm (S18FLPA150), stroke 200mm (S18FLPA200), sealed type (IP54, the length of "A" is extended by abt. 6 mm), with spring return device (up to 100mm stroke. Friction is 3N [300gf]. Spring return device is mounted on the outer shaft and the shaft is extended by some extent depending on the models. For details please ask us), special machining on the shaft.

Produktspezifikationen

Standard resistance values
500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ
Total resistance tolerance
±10%
Independent linearity tolerance
Standard class: ±0.7%, ±0.4%, ±0.3%
Precision class: ±0.5%, ±0.25%, ±0.2%
Resolution
Essentially infinite
Output smoothness
Within 0.1% against input voltage
Contact resistance variation
Within 2% C.R.V.
Power rating
0.3W, 0.6W, 0.75W, 1.25W
Stroke
15mm, 30mm, 50mm, 100mm
Insulation resistance
Over 1.000MΩ at 500VDC
Dielectric strength
1 minute 1.000V.A.C.
Friction
Within 0.3N (30gf), Within 1N(100gf)
Stopper strength
Approx. 90N (9kgf)
Resistance temperature coefficient
±400p.p.m./°C
Mass
Approx. 60g, approx. 70g, approx. 100g, approx. 140g