AWL Zugkraftmesslaschen-Serie

Vergleichbar mit der leichten Serie, jedoch mit einem Messbereich von bis zu 25 Tonnen

About the AWL Loadlink Series

The wireless load transducer is a strain gauge based stainless steel tension type sensor. It has the capability of wirelessly transmitting its data to one of our compatible readouts and displays or recording its data locally.

Its inbuilt 32MBit memory can hold up to 280 hours of data which can then be downloaded to a PC via its USB cable. The load sensor transmits using the worldwide license free frequency of 2.4GHz on two bulit in antennas.

The load sensor is used with the handheld receiver AWL-HR which can read several devices at the same time, and/or the stand alone receiver interface AWL-RI which is used to output the data via RS232/RS422.

Features AWL Loadlink Series

  • Wireless, so easy to install and remove between installations
  • Transmits data up to a distance of 100m
  • Transmits data at up to 10 times a second
  • Internal Memory for up to 280 hours of data
  • 11-28V external supply chargeable
  • Connect to PC via USB
  • PC software for customer settings
  • Flexible automatic shutdown to conserve battery
  • Dual ruggedised internal antennas
  • FCC Part 15/RSS
  • Import data into Excel

Produktspezifikationen

Nominal load
15, 20, 25 Tonne
Accuracy
±0.25%
Max overload
200%
Breaking load
> 300%
Temp coef of zero
0.05%°C
Temp coef of span
±0.01% °C
Environmental protection
IP65
Weight
5Kg (up to 10 tonne range)
Materials
Stainless steel/aluminum
Operating temperature range
-10ºC to + 50ºC
Storage temperature range
-20ºC to + 60ºC
Internal memory
32Mbit
Transmitter Output Power EIRP
+10 dBm
Frequency Range
2425 - 2430 MHz 20 Channels 250kHz steps
Modulation
MSK
Data Rate
250Kbps
Antenna
Dual patch antennas
RFI/EMC
To EN301-489 1, FCC Part 15, RSS
Type
Li-Ion Battery MGL-9015
Voltage
3.7V 2600mAH
Data transmit rate
Operating time at 20°C
1/sec
1000 hours+
10/sec
120 hours
Connector
External power
Voltage
11 to 28V
Charge time
TBC