AAA640 MEMS Accelerometer
Acceleration sensor with 2 signal outputs in MEMS technology
About the AAA640 MEMS Accelerometer
The AAA640 Series of Solid State Accelerometers measure vector acceleration with high accuracy using an advanced micromachined (MEMS) silicon sensor incorporating a gas damping feature. Unlike fluid damped devices the gas damping employed is essentially independent of temperature. The transducer also incorporates positive mechanical stops confering excellent shock resistance. The accelerometer is also compensated for the effects of temperature on both sensitivity and zero.
Key features AAA640
- Essentially zero temperature coefficent of damping ratio
- Filtered and unfiltered outputs simultaneously available
- Integral temperature compensation
- DC input - DC output
- Signal ground isolated from power ground
- High reliability
Applications AAA640
- Data acquisition systems
- Crash recorders
- Fatigue life monitoring and prediction
- Monitoring and controlling deceleration in mass transit systems
- Road bed analysis and fault detection equipment for high speed railways
- Military and civil flight simulators
- Low frequency vibration monitoring
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Acceleration | Will withstand constant 20 times rated range in all 3 axes without damage |
| Compensated temperature | 0°C to +50°C |
| Damping ratio | 0.7 (± 0.2) @ 25°C |
| Humidity/immersion | IP65 |
| Hysteresis | ≤ 0.02% |
| Input current | 100mA dc max. |
| Measurement range | ±1g / ±2g / ±3g / ±5g / ±10g / ±20g |
| Non-linearity | ±0.5% |
| Operating temperature | -40°C to +100°C |
| Output [supply voltage] | ±5V filtered and unfiltered [6 - 32 VDC unregulated] |
| Resolution | ≤ 0.001% |
| Shock | 200g for 2ms (½ sine wave) |
| Storage temperature | -55°C to +130°C |
| Weight | 120 g max. |
Produits apparentés
Besoin d'autre chose?
DXA-100/200 Series Servo Accelerometer
- Digital Output
- Single or Dual Axis for a wide variety of applications
- Resolution 8 μg
LCF-200 Servo Accelerometers
- ±0.5g to ± 5.0g Full Range
- Filtering 5 to 100 Hz Bandwidth
- Exceptional Bias & Scale Factor