NSS1-IP Tilt Measuring System
Single axis tilt switching system with 2 switching contacts
Caractéristiques principales
- Measuring range ±3° up to ±60° or 0 … 90°
- Switching accuracy max. 0,5% of measuring range
- Supply voltage 18 … 30 VDC
- Output: 2 potential-free switching contacts (max. 30VDC/0,5A)
About the NSS1-IP Tilt Measuring System
The single axis industrial tilt switching system NSS1-IP is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in one axis and intended for side assembly. Available tilt measuring & monitoring ranges are ±3° to ±60° or 0 … 10° to 0 … 90°. By using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints can be adjusted as needed over the whole measuring range. The relays have potential-free switching contacts (max. 30 VDC / 0.5 A).
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Cross-sensitivity | < 1% up to ±60° |
Dimensions (w x h x d) | 175 x 80 x 57 mm (without EMC cable glands) |
Electrical connection | M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks |
Enclosure | EMC-safe aluminium die-cast enclosure |
Frequency range (-3db) | 0,5 Hz |
Max. power rating of relay | 30 VDC / 0,5 A |
Number of measuring axis | 1 |
Number of relay switching contacts | 2 |
Power consumption | ca. 4 W |
Preferred measuring range | ±3°, ±5°, ±10°, ±15, ±20, ±30, ±45°, ±60° 0 - 10°, 0 - 30°, 0 - 45°, 0 - 60°, 0 - 90° other measuring ranges on request |
Protection class | IP66 |
Supply voltage | 18 - 30 VDC, electronics protected against voltage reversal |
Switching accuracy at 23 °c | max. 0,5% of measuring range |
Temperature, operating | -20 to +60 °C |
Temperature, storage | -20 to +60 °C |
Test signal | 2 - 10 V, not short-circuit proof |
Weight | 1.000 g |
Produits apparentés
Besoin d'autre chose?
NSS2-M2-IP Tilt Measuring System
- Measuring range ±3° up to ±10°
- With 2 switching contacts per axis
- Robust EMC-safe aluminium enclosure IP66
NSZ1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- With 2 switching contacts & switching delay
- For rough and industrial environments