NSS1-IP Tilt Measuring System
Single axis tilt switching system with 2 switching contacts
Nyckelfunktioner
- Measuring range ±3° up to ±60° or 0 … 90°
- Switching accuracy max. 0,5% of measuring range
- Supply voltage 18 … 30 VDC
- Output: 2 potential-free switching contacts (max. 30VDC/0,5A)
About the NSS1-IP Tilt Measuring System
The single axis industrial tilt switching system NSS1-IP is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in one axis and intended for side assembly. Available tilt measuring & monitoring ranges are ±3° to ±60° or 0 … 10° to 0 … 90°. By using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints can be adjusted as needed over the whole measuring range. The relays have potential-free switching contacts (max. 30 VDC / 0.5 A).
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertRelaterade produkter
Behöver du något annat?
NSS2-M2-IP Tilt Measuring System
- Measuring range ±3° up to ±10°
- With 2 switching contacts per axis
- Robust EMC-safe aluminium enclosure IP66
NSZ1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- With 2 switching contacts & switching delay
- For rough and industrial environments