CK Pancake (Low profile) Load Cell (ATEX)
Caractéristiques principales
- Range: 200 to 2500kg
- 17-4 PH stainless steel construction
- Combined error < +/- 0.5%
- Protection rating IP67
- ATEX Certified
About the CK Pancake (Low profile) Load Cell (ATEX)
Load cells and weight sensors can be used to build weighing stations and other systems for weighing goods. They transform a load or weight into an electronic signal. This output signal can take the form of a change in current, frequency, or voltage, depending on the type of load cell and its configuration.
The CK Pancake (Low profile) Load Cell is suitable for use in environments with explosive atmospheres (ATEX/IECEx) due to its resistance against dust and vapor. That way, you always get exact measurements – even under difficult conditions and in harsh environments.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Combined error | ≤±0.5% |
| Material | 17-4 PH stainless steel |
| Max supply voltage without damage | 15V |
| Nominal load (e max) | 200 - 500 - 1000 - 2500 kg |
| Protection class | IP67 |
| Rated output | 1 mV/V ±15% |
| Safe overload (% of full scale) | 120% |
| Ultimate overload (% of full scale) | 200% |
| Zero balance | ±1% |
Produits apparentés
Besoin d'autre chose?
CLS Pancake (Low profile) Load Cell (ATEX)
- Range: 1000 to 5000kg
- AISI 420 stainless steel construction
- Combined error < +/- 0.03%
Capteur de force en compression CBX – Profil bas
- Capacité de 15 à 50 tonnes
- Corps en inox certifié IP68
- Option double pont pour sécurité accrue
Capteur de force en compression CBL – Profil bas
- Jusqu’à 100 tonnes avec précision OIML R60 C3
- Boîtier IP68 en acier inoxydable
- Certification ATEX, IECEx et IP69K en option