CP22C Single-turn Potentiometer
1-Turn Potentiometer Metal Housing, Wirewound (Bushingmount)
Caractéristiques principales
- Wirewound
- Dimensions D x L (mm): 22x12
- Standard Resistance Range 50 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.25
- Mechanical travel: 360°
- Electrical travel: 355° ±5°
About the CP22C Single-turn Potentiometer- Wirewound (Bushingmount)
The CP22C is a low-cost potentiometer with metal housing and rear extended lug terminals.
Special Specifications Available
Lower resistance values (10Ω, 20Ω), extra taps (available up to 1 taps), shaft with front and rear extension (rear shaft with 3mm dia. and 20mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 355º ±5º |
| Independent linearity tolerance | Standard Class ±0.5% Precision Class ±0.25% (±0.35% in case of within 1kΩ) |
| Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
| Mass | Approx. 30g |
| Max. practical resistance value | 20kΩ |
| Mechanical travel | 360º (Endless) |
| Noise | Within 100Ω E.N.R. |
| Power rating | 0.5W |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Shaft diameter (mm) | 6 |
| Standard resistance range | 50Ω to 10kΩ |
| Starting torque | Within 5mN·m (50gf·cm) |
| Total resistance tolerance | Standard Class ±3%(H) Precision Class ±1%(F) |
Produits apparentés
Besoin d'autre chose?
CP22E Single-turn Potentiometer
- Low-cost potentiometer with plastic housing
- Resistance range 50 Ω to 10 kΩ
- Independent linearity ±0.5% to ±0.25%
CP22 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 22.23 x 15 mm
- Resistance range 50 Ω to 10 kΩ
CP30 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 27 x 15 mm
- Resistance range 50 Ω to 20 kΩ