ASI 1xVIB
0 – 10 kHz bandwidth accelerometer and temperature sensor for machine condition monitoring applications
About the ASI 1xVIB
DEWESoft ASI 1xVIB 50g is a vibration and temperature measurement probe. Packaged in a small aluminium housing it consists of three sensors: a) single axis accelerometer with 0-10 kHz bandwidth and analog voltage output, b) temperature sensors with I2C interface and c) low-speed triaxial accelerometer with I2C interface. The probe is rated with IP67 ingress protection and -20 to 85 degC temperature range.
Key features
• 0-10 kHz bandwidth, 50 g range, 25 μg√Hz noise density
• Embedded temperature sensor
• Fits to DEWESoft IOLOITEd 2xASI EtherCAT interface
Applications
• Production robot condition monitoring
• Machine condition monitoring
• Bearing fault detection
Do you need this sensor for your next project?
Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.
Product downloads
Talk to our experts
Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| 0g offset error (-40...125 degc) | 5 g |
| Bandwidth (+-10%) | 0-10 kHz |
| Cable length | 2 m |
| Connector | M8, 8 pin, male |
| Crossaxis sensitivity | Min. -1 % / Max. +1 % |
| Housing material | Aluminium, hard anodized |
| Ip rating | IP66 |
| Linearity error | 0.1 % FS |
| Measurement range | 50g |
| Mounting type | Vertical, M6 thread |
| Noise (10-1000 hz) | 1 mg rms |
| Noise (10-10000 hz) | 3 mg rms |
| Nominal sensitivity | 40 mV/g |
| Operating temperature | 20 ... 85 degC |
| Sensitivity change due to temperature (0...85 degc) | +-2 % |
| Sensor module weight | 40 gram |
| Supply voltage | 5 V |