FDRF096-Insp Laser Debris Inspection System

For non-contact detection of the debris inside the circular grooves of different items

About the FDRF096-Insp Laser Debris Inspection System

This system is intended for non-contact dection of the debris inside the circular grooves of different technological items such as brake calipers and so on. The system can be used also for groove seal profiling (seal deformation inspection).

The operation of the system is based on the scanning of the item surface by a binocular triangulation laser sensor. It contains a laser sensor mounted on a rotating module. Radiation of a semiconductor laser from the sensor is focused onto the item surface. Radiation reflected by the surface is collected by laser sensor and corresponding angle of rotation from polar coordinates of the surface. An in-built signal processor analyzes the surface profile and detects the presence of debris on the surface.

Specifications

Inspected grooves diameter range
35-53mm
Minimal size of detected debris
0,03 (thickness) x 0,1 x 0,1
Space resolution (points/turnover)
3200
Laser sensor linearity
±10µm
Inspection time
1,2s
Light source
Red semiconductor laser, 660nm wavelength
IP rating
IP67
Housing material
Aluminum
  • Follow us: