FDRF096-Insp Laser-Schmutzinspektionssystem
Für die berührungslose Erkennung von Fremdkörpern in den kreisförmigen Nuten verschiedener Gegenstände
About the FDRF096-Insp Laser Debris Inspection System
This system is intended for non-contact dection of the debris inside the circular grooves of different technological items such as brake calipers and so on. The system can be used also for groove seal profiling (seal deformation inspection).
The operation of the system is based on the scanning of the item surface by a binocular triangulation laser sensor. It contains a laser sensor mounted on a rotating module. Radiation of a semiconductor laser from the sensor is focused onto the item surface. Radiation reflected by the surface is collected by laser sensor and corresponding angle of rotation from polar coordinates of the surface. An in-built signal processor analyzes the surface profile and detects the presence of debris on the surface.
Benötigen Sie dieses Produkt für Ihr Projekt?
Fordern Sie jetzt ein unverbindliches Angebot an oder senden Sie uns Ihre Kontaktdaten für eine unverbindliche und kostenfreie Beratung. Unsere Vertriebsingenieure setzen sich so schnell wie möglich mit Ihnen in Verbindung.
Sprechen Sie mit unseren Experten
Nicht das richtige Produkt? Wir bieten Standard-Sensoren, helfen Ihnen aber auch gerne mit einem maßgeschneiderten Aufnehmer oder einer kompletten Messlösung weiter. Kontaktieren Sie uns einfach für eine kostenlose Beratung oder einen Kostenvoranschlag.
KontaktTechnische Spezifikationen
Spezifikationen | Wert |
---|---|
Housing material | Aluminum |
Inspected grooves diameter range | 35-53mm |
Inspection time | 1,2s |
Ip rating | IP67 |
Laser sensor linearity | ±10µm |
Light source | Red semiconductor laser, 660nm wavelength |
Minimal size of detected debris | 0,03 (thickness) x 0,1 x 0,1 |
Space resolution (points/turnover) | 3200 |