NSZ1-IP Tilt Meetsysteem
Eenassig kantelschakelsysteem met 2 schakelcontacten en schakelvertraging
Belangrijkste kenmerken
- Measuring range ±3° up to ±60° or 0 … 90°
- Switching accuracy max. 0,5% of measuring range
- Supply voltage 18 … 30 VDC
- Output: 2 potential-free switching contacts (max. 30VDC/0,5A)
About the NSZ1-IP Tilt Measuring System
The single axis industrial tilt switching system NSZ1-IP is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in one axis and intended for side assembly. Available tilt measuring & monitoring ranges are ±3° to ±60° or 0 … 10° to 0 … 90°. By using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints can be adjusted as needed over the whole measuring range. The relays have potentialfree switching contacts (max. 30 VDC / 0.5 A). The switching delay of the relay is 1 sec at the standard version. Other switching delays possible on request.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| Cross-sensitivity | < 1% up to ±60° |
| Dimensions (w x h x d) | 175 x 80 x 57 mm (without EMC cable glands) |
| Electrical connection | M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Frequency range (-3db) | 0,5 Hz |
| Max. power rating of relay | 30 VDC / 0,5 A |
| Number of measuring axis | 1 |
| Number of relay switching contacts / switching delay | 2 / 1 sec |
| Power consumption | ca. 4 W |
| Preferred measuring range | ±3°, ±5°, ±10°, ±15, ±20, ±30, ±45°, ±60° 0 - 10°, 0 - 30°, 0 - 45°, 0 - 60°, 0 - 90° other measuring ranges on request |
| Protection class | IP66 |
| Supply voltage | 18 - 30 VDC, electronics protected against voltage reversal |
| Switching accuracy at 23 °c: | max. 0,5% of measuring range |
| Temperature, operating | -20 to +60 °C |
| Temperature, storage | -20 to +60 °C |
| Test signal | 2 - 10 V, not short-circuit proof |
| Weight | 1.000 g |
Gerelateerde producten
Heeft u iets anders nodig?
ASC TSF-360-CAN Digitale Fluidic Tiltsensor
- Hoekbereik: 360°
- Lage transversale kantelgevoeligheid
- Uitstekende stabiliteit op lange termijn