Single Axis Accelerometers
One-axis Piezoelectric IEPE Acceleration Sensors are made of PZT ceramic and have a built-in charge-voltage converter and a pre-amplifier.


ARH-A Capacitive Accelerometer
Waterproof, low-capacitance accelerometer suitable for concrete embedding
Capacity
10m/s²-500m/s²
Non-linearity
1 %
Rateped Output
0.5mV/V(1000×10-6 strain)
Technology
Piezoresistive without amplifier

EGAS Mini Critically Damped Accelerometer
Well-suited for on-site testing as well as laboratory use
Measurement range
±5 to ±2500 g
Non-Linearity
1 %
Output
±0.1 V
Technology
Capacitive with amplifier

EGAXT Mini Critically Damped Accelerometer
Miniature acceleration sensor with an overload limit of 10000g
Measurement range
±5 to ±2500 g
Non-Linearity
1 %
Output
±0.1 V
Technology
Piezoresistive without amplifier

EGCS-A2 | EGCS-B2 Critically Damped Accelerometer
Ideal for low frequency measurements
Measurement range
±5 to ±5000 g
Non-Linearity
1 %
Output
A2: ±5 V, B2: ±2.5 V
Technology
Capacitive with amplifier

EGCS-D0 | EGCS-D1S Critically Damped Accelerometer
Ideal for applications which experience rough handling
Measurement range
±5 to ±10000 g
Non-Linearity
1 %
Output
±0.2 V
Technology
Piezoresistive without amplifier

JMA 100 | 200 | 300 MEMS Accelerometers
Analog MEMS acceleration sensor available in single, dual and triaxial configuration
Measurement range
±0.5 to ±10 g
Non-Linearity
0.05 %
0.08 %
0.08 %
Output
±5 V
0 - 5 V
4 - 20 mA
0 - 5 V
4 - 20 mA
Technology
Capacitive with amplifier

JMA 165 Precision Rail MEMS Accelerometers
Low-cost MEMS technology with heater, CENELEC/AREMA certified
Measurement range
±0.5 g
±1 g
±1 g
Non-Linearity
0.1 %
0.2 %
0.2 %
Output
±5 V
Technology
Capacitive with amplifier

4801A Amplified DC Accelerometer
MEMS DC signal conditioned acceleration sensor designed for vehicle testing, structural testing, test & instrumentation, transportation measurements, environmental testing
Measurement range
±2 to ±200 g
Non-Linearity
1 %
Output
±2 V
Technology
Capacitive with amplifier

AAA640 MEMS Accelerometer
Acceleration sensor with 2 signal outputs in MEMS technology
Measurement range
±1 to ±20 g
Non-Linearity
0.5 %
Output
±5 V
Technology
Capacitive with amplifier

QFM-180 Miniature Quartz Flexure Accelerometer
The Miniature Accelerometers are state of the art quartz flexure technology that provides high accuracy, repeatability and stability even in the harshest of environments
Measurement range
±20 g
Bias Stability (1 month composite)
less than 220 ug
Output Impedance (Ω)
External Load Resistor Dependent
Technology
Quartz

QFA-180-30G-LC Low Input Current Quartz Flexure Accelerometer
The QFA-180-30G-LC series accelerometers are state-of-the-art Artificial quartz bending technology that offers high accuracy, Repeatability and stability even in the square flange - Outline drawing of harshest environments.
Measurement range
±30 g
Bias Stability (1 month composite)
less than 250 ug
Output Impedance (Ω)
External Load Resistor Dependent
Technology
Quartz