H118 Linear Inductive Position Sensor

Stainless steel mounting flange has two 3.2 mm by 30 degree wide slots on a 25 mm pitch

About the H118 Linear Inductive Position Sensor

The H118 is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a small diameter, short-bodied sensor is required for operation in hazardous areas.

The incorperated electronics system is CSA approved for use in potentially explosive gas/vapour and dust atmospheres.

The unit is compact and space-efficient, being responsive along almost its entire length.

Overall performance, repeatability and stability are outstanding over a wide temperature range. It provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 2mm to 50mm and with full EMC protection built in.

The sensor has a compact 19mm diameter stainless steel body, is easy to install and set up. The stainless steel mounting flange has two 3.2 mm by 30 degree wide slots on a 25 mm pitch. The stainless steel plunger can be supplied free or captive, with female M4 thread, or springloaded with a ball end. Environmental sealing is to IP67.

Features H118

  • Intrinsically safe for Gas and Dust to: Class I, Zone 0 Ex ia / AEx ia
  • Non-contacting inductive technology to eliminate wear
  • Travel set to customer's requirement
  • Compact 19mm diameter body
  • High durability and reliability
  • High accuracy and stability
  • Sealing to IP67

As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.

Specifications

Measurement range
Up to 50mm
Independent linearity
±0.1% to ±0.25%
Output signal
0.5-4.5VDC ratiometric
Frequency response
10KHz (-3dB)
Body diameter
19mm
Sealing
IP67
  • Follow us: