+31 (0)70 392 44 21

Visit our location page for your nearest Althen location.

sales@althen.nl

Visit our location page for your nearest Althen location.

MDM390 Differential Pressure Transmitter

Small sized, easy to use differential pressure sensor

Key features MDM390

  • OEM differential pressure sensor
  • Full solid insulation, high stability, reliability and accuracy
  • Constant current supply
  • Max. static pressure 20MPa
  • G1/4 female pressure port
  • Liquid, gas and other media differential pressure measurement
  • Compact size.

Information & Quotation

Do you need budgetary pricing or have questions about this product? Let us know how we can help you!

About the MDM390 Differential Pressure Transmitter

The MDM390 Differential Pressure Transducer is produced by putting OEM differential pressure sensor into fully-welded housing with G1/4 female for both positive and negative cavities. The transducer can be mounted into measuring tubes through G1/4 female pressure port or leading tube.

This product uses cable connection. The transducer can be widely applied in industrial process control, flow measurements, medical devices, air dynamical measurements and liquid pressure instruments or pneumatic plants, etc.

  • Specifications
  • Datasheets
Specifications
Pressure range
0~35kPa…3.5MPa
Zero output
≤2mVDC
Output signal
≥60mVDC
+Overpressure
2 times FS
-Overpressure
1 time FS or 1MPa(min. value is valid)
Static pressure
≤20MPa
Static pressure effect
≤0.05mV/100kPa
Zero drift
<±0.02mV/℃
FS drift
<±0.02%FS/℃
Compensation temperature
0℃ ~50℃
Operation temperature
-10℃ ~70℃
Storage temperature
-20℃ ~85℃
Response time
+ pressure cavity<3kHz - pressure cavity<2kHz
Diaphragm
Stainless steel 316L
Housing
Stainless steel 1Cr18Ni9Ti
O- Ring
Viton
Cable
Φ7.2mm PVC cable
Insulation resistor
100MΩ,100VDC
Protection
IP65
Datasheets
Downloads

Information & Quotation

Do you need budgetary pricing or have questions about this product? Let us know how we can help you!

Share this page by:
  • Follow us: