G505 Intrinsically safe slim-line rotary position sensor

---

Key features

• Intrinsically safe for explosive gas zones
• Factory-set measurement angle from 15° to 160°
• Non-contact inductive technology
• High linearity and EMC protection
• Compact stainless steel body Ø19 mm
• Sealed to IP67 standard

---

Performance highlights

The G505 is a slim-line rotary sensor designed for hazardous environments requiring angular displacement feedback. With its intrinsically safe EX08 electronics, it is CSA-approved for Class I, Zone 0 / Division 1 gas/vapour atmospheres. The sensor delivers linear analog output over a customer-defined angle between 15° and 160°, with full 360° mechanical freedom. It features infinite resolution, low torque, and excellent repeatability.

Usage conditions

The G505 performs reliably in ambient temperatures from -40 °C to +80 °C, with IP67 sealing to resist dust and moisture. It must be used with a certified galvanic isolation amplifier (e.g. Althen G005) to maintain compliance in hazardous zones.

Possible applications

• Valve position feedback in oil & gas
• Rotary control in process automation
• Tank level angle sensors in chemical environments
• Compact OEM applications needing angle sensing
• Explosion-proof robotics or actuator systems

Advantages of choosing this product

OEMs and integrators benefit from the G505’s compact 19 mm diameter, robust stainless steel build, and adaptable mounting options (flange or servo). Calibration is done per project, ensuring optimal output range, while maintaining safety and performance standards.

Other important features

• Output: 0.5–4.5 V ratiometric
• Input: 5 VDC (±10%)
• Current: 10 mA nominal
• Frequency response: >10 kHz
• EMC: EN 61000-6-2, EN 61000-6-3
• Torque: < 15 mNm static
• MTBF: 350,000 hrs at 40°C
• Mounting: Flange (default) or servo
• Cables: 3-core or 5-core (for long runs >10m)

---