NM2-IP2-2L-OLED Tilt Measuring System
Dual axis tilt measuring system in a compact aluminium enclosure with an OLED display per measuring axis
Key features
- Measuring range ±3° up to ±45° per axis
- Accuracy ±0,1° (up to ±10°), ±0,2° (up to ±30°), ±0,25° (up to ±45°)
- Analogue output 4 … 20 mA (2-wire-technology)
- Front panel OLED display per axis
- Supply voltage 18 … 28 VDC
About the NM2-IP2-2L-OLED Tilt Measuring System
The dual axis industrial tilt measuring system NM2-IP2-2L-OLED is the combination of two non-contact inclination sensors, sensor adapted electronics and two OLED displays. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±45°. The two analogue output signals of 4 - 20mA in 2-wire-technology are standard signals and therefore a further analysis is easily feasible. The display of the current measured value, bar graph, trend display, the peak value (MIN, MAX) and the setting of limit values takes place via an OLED display for each measuring axis in the front panel housing.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments. Furthermore, the built-in electronics are protected against humidity and vibrations. The two OLED displays are designed for installation in a front panel.
Do you need this sensor for your next project?
Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.
Product downloads
Talk to our experts
Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| Accuracy at 23°c | Up to ±10°: ±0.1° ; Up to ±30°: ±0.2° ; Up to ±45°: ±0.25° |
| Analogue output / burden | 4 - 20 mA (2-wire), max burden depending on supply voltage |
| Cross-sensitivity | < 1.5% at 30° |
| Dimensions (w x h x d) | ca. 160 x 65 x 86 mm (without EMC cable gland); ca. 96 x 48 x 53 mm (OLED display, without connection terminals)) |
| Electrical connection | 3 m connection cable 2 x 2 x 0.25 mm²; optional: cable length according to customer requirements |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Frequency range (-3db) | 0.5 Hz |
| Number of measuring axis | 2 |
| Power consumption | ca. 2 W |
| Preferred measuring range | ±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45° (other measuring ranges for both axis as well as different measuring ranges for each axis (e.g. X: ±30° Y: ±3°) on request possible) |
| Protection class | IP66 |
| Supply voltage | 18 - 28 VDC |
| Temperature, operating | -20 to +60 °C (measurement system); 0 to +40 °C (OLED display) |
| Temperature, storage | -20 to +60 °C |
| Weight | ca. 1450 g |
Related products
Need something else?
NM2-IP2-2L-OLED Tilt Measuring System
- Measuring range ±3° up to ±45° per axis
- Front panel OLED display per axis
- Accuracy from ±0,1° to ±0,25°
NM2-IP-4L Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 - 90°
- Dual axis tilt measuring system
- Robust EMC-safe aluminium enclosure IP66
NSS1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- Switching accuracy max. 0,5%
- With 2 switching contacts