FSCB30A Sinus Cosinus Potentiometer
Non-Linear Conductive Plastic (Servomount) SIN/COS Potentiometer
Nyckelfunktioner
- Dimensions (mm) DxL: 29×22.5
- Element: conductive plastic
- Function characteristics: 360°sin/cos
- Conformity peak to peak (± %): 1.0 to 0.7
- Mechanical travel: 360°
- Electrical travel: 360°
About the FSCB30A Sinus Cosinus Potentiometer
The FSCB30A is a servomount type potentiometer with ball bearings and precision sine/cosine output. It is available in multiple diameters.
Standard Specifications Available
Multi-ganged (available up to 3 gangs. Housing length is extended by 16mm per 1 gang), shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length), shaft dia. (ø3.175mm) with inch dimensions, special machining on the shaft.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Precision Class ±0.7% | |
| (peak-peak) resolution | Essentially infinite |
| Conformity tolerance | Standard Class ±1.0% |
| Contact resistance variation | Within 8% C.R.V. |
| Dialectric strength | 1 minute at 500 V.A.C. |
| Electrical travel | 360º (Endless) |
| Insulation resistance | Over 1000MΩ at 500 V.D.C. |
| Mass | Approx. 30g |
| Mechanical travel | 360º (Endless) |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 0.75W |
| Resist. temp. coefficient | ±400p.p.m./ºC |
| Shaft dia. (mm) | 3 |
| Special practical resistance values | 500, 20k, 50k (Ω) |
| Standard resistance values | 1k, 2k, 5k, 10k (Ω) |
| Starting torque | Within 3mN·m (30gf·cm) |
| Total resistance tolerance | Standard Class ±15% (L), Precision Class ±10% (K) |
Relaterade produkter
Behöver du något annat?
FSCB50A Sinus Cosinus Potentiometer
- Measuring range: 360°
- Conformity peak to peak: ±0.5% to ±0.2%
- Various standard specifications available
MPH22 Motor Potentiometer
- Measuring range: 1 or 10 turns
- Slipping Torque: 20-30 mN*m or 50 mN*m
- Reduction gear ratio: multiple
MA Turns-counting Dials Potentiometer
- Measuring range: 3, 5, 10, 15, 20
- Analog readout
- Elegant appearance & rigid construction