REC Inkrementaldrehgeber
Compact sized encoder fit to any application where short body dimensions are required
Key Features REC
- Pulses per revolution: 2 to 12500
- Body length, 38 mm
- Aluminium case
- M12 connector outlet
- IP64 Protection degree
REC - Incremental rotary encoders
Compact sized encoders series REC fit to any application where short body dimensions are required - the case length only measures 38 mm. REC encoders are available with different mechanical versions: with round flange and servo copling (type REC520/REC540), square flange (REC620) or hollow shaft, with (REC450) or without elastic support (REC440).
The case is out of strong aluminium and connections are ensured by the connector type M12.
The pulses per revolution number ranges from 2 to 12500.
- Produktspezifikationen
Produktspezifikationen
Case length
38 mm
Case material
Aluminium
Shaft material
Steel AISI 303
Weight
210 g circa
Shaft/joint hole Ø mm
10, 9.52, 8, 6 | 8, 10, 12, 14, 15
Revolutions/minute
6000 continuos/10000 temporary
Starting torque
≤0.8 Ncm
Inertia
≤25 g cm2
Shock resistance (11 ms)
50 G
Protection degree
IP64
Operating temperature
-10 ÷ 70°C
Stocking temperature
-20 ÷ 80°C
Pulse code
Incremental
Pulses/revolution
2 ÷ 12500
Zero pulse
One pulse/revolution (REC521/541/621/REC441/451)
Output signals
Two square waves 90° ±15° out of phase – Zero pulse width: 90°±15°
Electronic output
Push-pull, line driver 5Vdc or 8/24Vdc signals protected against short circuits
Supply voltage
5Vdc or 8/24Vdc protection against polarity reversal
Absorption
30÷80 mA max
Max. frequency
100 KHz
Connections
Radial cable 1 m long, 5-pin M12 radial plug connector, 8-pin connector for line driver output, Optional: tap connector with cable
