FSCB22A Sinus Cosinus Potentiometer
Non-Linear Conductive Plastic (Servomount) SIN/COS Potentiometer
Nyckelfunktioner
- Dimensions (mm) DxL: 22.23×22.5
- Element: conductive plastic
- Function characteristics: 360°sin/cos
- Conformity peak to peak (± %): 2.0 to 1.0
- Mechanical travel: 360°
- Electrical travel: 360°
About the FSCB22A Sinus Cosinus Potentiometer
The FSCB22A is a servomount type potentiometer with ball bearings and precision sine/cosine output. It is available in multiple diameters.
Standard Specifications Available
Multi-ganged (available up to 8 gangs. Housing length is extended by 16mm per 1 gang), shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length), shaft dia. (ø3.175mm) with inch dimensions, special machining on the shaft, oil-filled type.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Conformity tolerance (peak-peak) | Standard Class ±2.0%, Precision Class ±1.0% |
| Contact resistance variation | Within 8% C.R.V. |
| Dielectric strength | 1 minute at 500 V.A.C. |
| Electrical travel | 360º (Endless) |
| Insulation resistance | Over 1,000MΩ at 500 V.D.C. |
| Mass | Approx. 20g |
| Max. working voltage | 250V |
| Mechanical travel | 360º (Endless) |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 0.5W |
| Resist. temp. coefficient | ±400p.p.m./ºC |
| Resolution | Essentially infinite |
| Shaft dia. (mm) | 3 |
| Special practical resistance values | 500, 20k, 50k (Ω) |
| Standard resistance values | 1k, 2k, 5k, 10k (Ω) |
| Starting torque | Within 3mN·m (30gf·cm) |
| Total resistance tolerance | Standard Class ±15% (L), Precision Class ±10% (K) |
Relaterade produkter
Behöver du något annat?
FSCB30A Sinus Cosinus Potentiometer
- Measuring range: 360°
- Servomount type with ball bearings
- Various standard specification available
FSCB50A Sinus Cosinus Potentiometer
- Measuring range: 360°
- Conformity peak to peak: ±0.5% to ±0.2%
- Various standard specifications available
MPH22 Motor Potentiometer
- Measuring range: 1 or 10 turns
- Slipping Torque: 20-30 mN*m or 50 mN*m
- Reduction gear ratio: multiple