NM2-IP-4L Tilt Measuring System
Dual axis tilt measuring system
Key features
- Measuring range ±3° up to ±60° or 0 - 90° per axis
- Accuracy ±0,1° (up to ± 15°), 0,5% of measuring range (up to ±60°)
- Analogue output 0 … (±)10 V or 0(4) … 20 mA (4-wire-technology)
- Supply voltage 10 … 18 VDC or 18 … 30 VDC
About the NM2-IP-4L Tilt Measuring System
The dual axis industrial tilt measuring system NM2-IP-4L is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±60°. The electrical wiring is realized in 4-wire-technology. For further evaluation of the measured inclination there are different standard analogue output signals per axis available, depending on the ordered type.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments.
Do you need this sensor for your next project?
Request a quotation today or leave your details to recieve more information from one of our experts.
Product downloads
Have it your way
Not exactly what you’re looking for? We offer standard sensors but can also help you with a tailor-made sensor or a complete measuring solution. Please contact us for advice or budgetary pricing.
Talk to an expertTechnical Specifications
Specification | Value |
---|---|
Accuracy at 23°c | Up to ±15°: ±0,1°, Up to ±60°: 0,5% of measuring range, Up to ±65°: on request |
Analogue output / burden | 0 - 10 V / ±10 V, max. 1 mA (short-time short-circuit proof) 0 - 20 mA, 4 - 20 mA, max. 500 Ω |
Cross-sensitivity | < 1% up to ±60° |
Dimensions (w x h x d) | 160 x 91 x 160 mm (without EMC cable glands) |
Electrical connection | M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks |
Enclosure | EMC-safe aluminium die-cast enclosure |
Frequency range (-3 db) | 2 Hz |
Number of measuring axis | 2 |
Power consumption | ca. 4 W |
Preferred measuring range | ±3°, ±5°, ±10°, ±15, ± 20, ±30, ±45°, ±60° other measuring ranges on request |
Protection class | IP66 |
Supply voltage | 10 - 18 VDC*, 18 - 30 VDC*, electronic is protected against voltage reversal |
Temperature, operating | -20 - +60 °C |
Temperature, storage | -20 to +60 °C |
Voltage insulation between supply voltage and analogue output | Galvanic isolation between supply voltage and analogue output, 200 V, higher voltage insulation on request |
Weight | 2.300 g |
Related products
Need something else?
NSS1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- Switching accuracy max. 0,5%
- With 2 switching contacts
NSS2-M2-IP Tilt Measuring System
- Measuring range ±3° up to ±10°
- With 2 switching contacts per axis
- Robust EMC-safe aluminium enclosure IP66
NSZ1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- With 2 switching contacts & switching delay
- For rough and industrial environments