Reliable shaft grounding to prevent spark erosion and reduce maintenance costs. Althen propeller shaft earthing systems provide a low-resistance connection between the propeller shaft and the ship’s hull. This safely discharges electrical currents, preventing harmful potential differences that can lead to spark erosion in propeller blades and shaft bearings.
Even vessels equipped with sacrificial anode systems can experience electrical insulation of the rotating shaft. Our earthing system helps prevent costly damage at an early stage and reduces long-term maintenance costs.
The system combines a copper slip ring with solid silver inlay and high-silver-content brushes to ensure optimal electrical continuity and long service life. Suitable for shaft diameters from Ø100 to Ø1400 mm, it can be equipped with single or double brush holders and an optional monitoring system for continuous performance control.
We offer standard Propeller shaft earthing systems, but can also help you with a customised design or a complete measurement solution
In order to direct the electrical current that flows through the propeller shaft to the hull of the ship, a proper propeller shaft grounding system contains parts that have a very low electrical resistance. The main component of the Althen PSE System consists of is a copper slipring with a solid silver inlay that is supplied with two stainless steel clamping bands including dedicated connectors. Furthermore, a brush holder is supplied which holds two silver/graphite brushes (80% Ag) that run over the silver track of the slipring. The brushholder is connected to the hull of the ship by means of an earthing cable. It has been proven that this set ensures optimal electrical continuity, which reduces total cost of ownership.
In addition to our PSE system, a monitoring set can be installed in the engine room to visualize the potential difference between the propeller shaft and the hull of the ship. This system contains an additional brushholder with a single brush that runs over the silver track of the slipring. This brusholder is insulated from the hull of the ship and connected to an analog mV-meter that indicates if the PSE system is working properly. The advantage of this monitoring system is that it operates independently without the need of power supply. The analog mV-meter on the monitoring unit has a range of 0-500mV.
When the shaft earthing set is working properly, the mV-meter should indicate a value below 50mV. Exceeding the 50mV means malfunction of the PSE system, which may be related to filthy or worn parts, or incorrect installation. Additionally the monitoring set can be supplied with a 4-20mA converter that offers an additional alarm function. This function can be used to send a signal to the bridge when the potential difference becomes too high due to malfunction of the PSE system.
More products and information about the maritime industry.
We offer propeller shaft earthing systems but can also help you with further measurement solutions for the maritime industry.