Weldable Strain Gauges for Static and Dynamic Strain Measurement
Weldable Strain Gages are installed by spot welding to metal specimens and have a maximum operating temperature of 800°C (-196 +800C)


AWM-8 Series Static and Dynamic Quarter Bridge with 3-wire System Strain Gauges
For both static and dynamic measurement
Amount of elements
Single element
Strain limit
1%
Resistance value
120Ω
Material to use on
Metal

AWMD-5 Full Bridge Strain Gauges for Dynamic Measurement
This 5mm gauge is applicable up to 800°C and dedicated to dynamic measurement
Amount of elements
Single element
Strain limit
1%
Resistance value
60Ω
Material to use on
Metal

AWMD-8 Full Bridge Strain Gauges for Dynamic Measurement
8mm full bridge gauge, is applicable up to 800°C and dedicated to dynamic measurement
Amount of elements
Single element
Strain limit
1%
Resistance value
120Ω
Material to use on
Metal

AWH-4 Full Bridge Strain Gauges for Static or Dynamic Measurement
Inconel 600 or SUS321 backing material selectable according test specimen material
Amount of elements
Single element
Strain limit
0.6%
Resistance value
60Ω
Material to use on
Metal

AWH-8 Full Bridge Strain Gauges | Althen Sensors
Half bridge gauge construction with a full bridge measurement method
Amount of elements
Single element
Strain limit
0.6%
Resistance value
120Ω
Material to use on
Metal

AWHU-5 Full Bridge Strain Gauges for Static or Dynamic Measurement
Static and dynamic measurement up to 800°C
Amount of elements
Single element
Strain limit
1%
Resistance value
60Ω
Material to use on
Metal

AWHU-8 Full Bridge Strain Gauges for Static or Dynamic Measurement
Suited for being mounted on a narrow or a curved part
Amount of elements
Single element
Strain limit
1%
Resistance value
120Ω
Material to use on
Metal

AW-6-350 Quarter Bridge Strain Gauges with 3-wire System
For measurement of specimen to which adhesion is not applicable
Amount of elements
Single element
Strain limit
0.5%
Resistance value
350Ω
Material to use on
Metal

AWC-2B 1-gauge 4-wire System Strain Gages for Harsh Environments
This 2mm gauge is hermetically sealed with the sensing element encapsulated in the stainless steel tube
Amount of elements
Single element
Strain limit
0.5%
Resistance value
120Ω
Material to use on
Metal

AWC-8B 1-gauge 4-wire System Strain Gages for Harsh Environments
8mm gauge suited to strain measurement for long term and/or in harsh environment
Amount of elements
Single element
Strain limit
0.5%
Resistance value
120Ω
Material to use on
Metal

AWCH-2 1-gauge 4-wire System Strain Gages
Hermetically sealed construction with a small size gauge base
Amount of elements
Single element
Strain limit
0.5%
Resistance value
120Ω
Material to use on
Metal